How to replace an impeller on an asynchronous pump!
Part 2 - Cleaning the impeller and pump cavity
When replacing or cleaning an impeller, carefully follow these steps:
Tools needed: Wire cutter, Philips screw driver, scouring pad, petroleum jelly, 2 zip ties
Step 1: Use a power washer or hose with power nozzle, (no soap) spray the inside to wash out any debris. Take some real fine scouring pad and clean out any debri inside the cavity.
Step 2: If you are replacing the same impeller, carefully clean to remove all the debri.
Step 1: Use a power washer or hose with power nozzle, (no soap) spray the inside to wash out any debris. Take some real fine scouring pad and clean out any debri inside the cavity.
Step 2: If you are replacing the same impeller, carefully clean to remove all the debri.
Nice Article! Thank You for sharing.
ReplyDelete